Pool Resurfacing in Cedar Park, TX: Quoted in Writing After a Free Inspection
Free on-site inspection and a written quote for Cedar Park pools.
- Free on-site inspection
- Written itemized quote
- Scheduling window quoted up front
Leander Pool Resurfacing replasters and resurfaces pools in Cedar Park with plaster, quartz and pebble finishes and the waterline tile, coping and deck work that goes with them, quoted in writing after a free on-site inspection. The crew drives to Cedar Park from Leander by US 183, about 7 minutes off-peak. Both cities draw from Lake Travis. Call (555) 555-0100 for the written quote.
Pool work we do in Cedar Park
Pool Finishes. White plaster, quartz and pebble go over a chipped-out shell; Buttercup Creek owners ask about both. See pool finish options.
Pool Remodeling. A remodel bundles a replaster with new tile, coping or a crack repair, common on Block House Creek shells. See pool remodeling.
Pool Tile and Coping. Popped tile and cracked coping get reset or bead blasted, often on post-2005 Ranch at Brushy Creek tile. See waterline tile and coping.
Pool Deck Resurfacing. Cracked concrete gets patched, then a knockdown or cool deck coat goes on, oldest first in Buttercup Creek. See pool deck resurfacing.
Pool Replastering. A full replaster chips out old plaster and trowels on a new finish; Buttercup Creek's 1980s shells go first. See pool replastering.
Pool Plaster Repair. Hollow spots and step delamination get patched without a full drain, the usual Block House Creek call. Read pool plaster repair.
Pool Drain and Acid Wash. A drain and acid wash lifts stains without a replaster when plaster is sound, common on Cedar Park's limestone side. Book a drain and acid wash.
Why Cedar Park pools are due for resurfacing
Cedar Park's housing stock sets the resurfacing calendar more than any one subdivision does. Census figures put 55.4 percent of homes at 1990 to 2009 and another 28.6 percent at 2010 to 2019, so most Cedar Park pools already carry a first finish older than fifteen years (F-CP-06).
Buttercup Creek broke ground in the early 1980s and did not finish until the mid-2010s, holding some of the oldest plaster in the city next to pools not a decade old (F-CP-07). Ranch at Brushy Creek, built 2005 to 2022, sits in between. No public count of Cedar Park's pools exists; the closest proxy is Williamson County's 183 new pool permits in 2025 (F-CP-11).
What pool resurfacing costs in Cedar Park
Cedar Park's short drive keeps logistics simple, and the estimator quotes the scheduling window up front. An older, never-chipped shell usually needs a full chip-out, not a bond coat, priced on the visit.
| Work | Typical range | Notes |
|---|---|---|
| White plaster (marcite) replaster, drain to refill | $4,500 to $7,000 | |
| Exposed pebble aggregate finish (Pebble Tec, StoneScapes, River Roc class) | $7,000 to $12,000 | |
| Quartz aggregate plaster (Diamond Brite, Quartzscapes class) | $6,000 to $9,000 |
Swipe the table sideways to see the notes column.
Leander-area ranges, September 2026; every job priced after the free inspection.
How the inspection works in Cedar Park
- You call or send the form, and the estimator books a time to come out to Cedar Park.
- The estimator sounds the shell for hollow spots, checks the waterline tile, coping and deck, and measures the pool.
- You get a written, itemized quote with the scheduling window and the warranty terms before anything is booked.
- The crew drains and preps the shell, sets tile and coping, applies the finish, fills the pool and leaves the 28-day startup instructions.
Water and weather in Cedar Park
Cedar Park's own utility publishes hardness at 183 ppm and pH 7.6 in its 2025 report, water pulled from Lake Travis (F-CP-08), milder than some neighbors but not soft enough to rule out scale.
Cedar Park sits west of I-35 on thin, limestone soil, so shells hold still while decks and coping move instead (F-SOIL-01). The 2021 freeze that hit 8 F at Camp Mabry (F-CLIM-01) and 2023's 45-day run of 100-degree afternoons (F-CLIM-03) show up as cracked coping and sun-baked plaster.
Nearby towns we also cover
Cedar Park sits near pool resurfacing in Brushy Creek and pool resurfacing in Round Rock on the same corridors, with Leander just north. The full list is on all service areas.
Every service we offer in Cedar Park
- Pool ReplasteringWhite or colored plaster on a gunite shell, full chip-out to the 28-day startup
- Pebble Pool FinishExposed and polished pebble that stands up to hard water
- Quartz Pool FinishQuartz aggregate plaster, smoother than pebble, tougher than marcite
- Polished Aggregate FinishPolished marble and glass bead finishes with a smooth, glassy feel
- Fiberglass Pool ResurfacingGelcoat and aggregate refinishing for fiberglass shells
- Pool Plaster RepairPeeling, delamination and hollow spots patched before they spread
- Pool Drain and Acid WashDrain and acid wash to lift stains and scale without replastering
- Pool Crack RepairShell and structural cracks injected, stapled or rebuilt
- Commercial Pool ResurfacingHOA, apartment and hotel pools on a scheduled drain-down
- Tanning Ledge and StepsAdd a tanning ledge, steps or bench to an existing pool
- Pool Tile Repair and ReplacementWaterline tile reset or replaced after popping, cracks or freeze damage
- Pool Tile Calcium RemovalBead blasting that strips the calcium line without scratching tile
- Pool Coping Repair and ReplacementLimestone, travertine and cantilever coping repaired or replaced
- Pool Deck RepairCracked, lifted and spalling concrete decks repaired and leveled
- Cool Deck RepairCool deck recoated with fresh knockdown texture and sealer
What happens when you call
The inspection
The estimator comes to the property, looks at the work in person, measures, and checks the things that change the price before quoting anything.
A written, itemized quote
Every line item goes on paper before any work starts: prep, materials, labor, cleanup and the scheduling window. No verbal numbers.
Warranty terms in the contract
Workmanship and material warranty terms come in writing and go in your contract so you can read them before you sign.
Scheduling you can plan around
You get a start window and a working-day estimate up front, and the crew tells you before anything changes.
Who this is not for
Leander Pool Resurfacing handles pool resurfacing and the related work listed on this site. It does not take on unrelated trades; if your job is outside that scope, a specialist in that trade is the right call.
Resurfacing questions from Cedar Park pool owners
Is Cedar Park treated as home turf, or does the short drive change anything?
It is a normal working day. Cedar Park sits about 6 miles and 7 minutes south on US 183, a short trip either way for the crew.
What does a replaster or pebble finish cost on a Buttercup Creek pool?
Plaster runs $4,500 to $7,000, and pebble runs $7,000 to $12,000. Size, a chip-out versus a bond coat, and tile change the number, not the drive. See pool finish options.
How long is a Cedar Park pool out of use ahead of spring?
Drain and prep run day one, demo day two, plaster day three, then a day or two to fill. A 28-day startup follows, no swimming the first week. The estimator gives the exact day count in the quote.
Cedar Park pulls from Lake Travis too; is that why my plaster is chalky?
Cedar Park's 2025 report lists hardness at 183 ppm and pH 7.6, different from Leander's on the same lake. Scale and plain age both look chalky; an inspection tells which.
Does Cedar Park require a permit for a replaster?
Neither the Cedar Park permit page nor its pool guideline says whether a resurface needs one, so confirm with the Cedar Park Development Services permits page first. Texas licenses no plasterer; ask for proof of insurance and a written warranty instead.
A pool can look fine from the board and hide a hollow spot underfoot. Cedar Park gets the same free inspection as anywhere else here. Call (555) 555-0100 before the calendar fills.
Nearby towns we also cover
Get a written quote
Call (555) 555-0100 or send the form. The next step is a free on-site inspection and a written quote with every line item before any work starts.
Call (555) 555-0100